Status | Events - Comtech EF Data LPOD Series Installation And Operation Manual

4.5.4.4

Status | Events

Use this page to see stored events data. Additionally, use it to set the parameters for how the
LPOD triggers events and alarms.
Events/Faults
Click [Refresh] to see the latest page data.
Unread Stored Events
This read-only scrollable window displays the unread stored events log in sequential, date-
stamped format. A running tally of the number of unread stored events is displayed in the window
header. The unit returns and displays the five oldest stored events in the alarm log. All events that
are read from the log are also automatically removed from the log.
•
Select Read Next Five Events to show the next five unread stored events in the log.
•
Select Clear Events Log to clear all stored events from the log.
•
Select Initialize Events Pointer to reset the internal pointer to allow queries to start at
the beginning of the stored events log.
Click [Submit] to update the window according to your selection.
Ethernet Interface Operation
Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)
Figure 4-18. 'Status | Events' Page
4–29
Revision 15
MN-LPOD