Radf Opening/Closing Switch Adjustment - Toshiba e-STUDIO556 Service Manual

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO556:

Table of Contents

RADF opening/closing switch adjustment

Adjust the bracket position so that the sensor is turned ON when the height "J" becomes 145 mm or

less (within the empty weight falling limit).

Take off the RADF rear cover.

P.4-117 "4.12.3 RADF rear cover")

Loosen the fixing screw of the bracket. Slide

the bracket vertically using the scale as a

guide to adjust the position where the switch

is turned ON.

Tighten the fixing screw of the bracket. Install

the RADF rear cover.

e-STUDIO556/656/756/856(Ver03)

Table of Contents