Toshiba e-STUDIO556 Service Manual page 244

Note:
When the cleaning web has been installed,
be sure that the web is tightly reeled.
(4) Remove 2 E-rings, 2 washers, and 2 one-
way bearings. Then take off the web pushing
roller.
Notes:
1. When assembling the unit, be sure that
the one-way bearings are in the correct
directions.
2. Be sure that the web pushing roller rolls
only in the direction of the arrow in the
figure.
e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
Washer One-way bearing
Mark side
Web pushing roller
© 2012 TOSHIBA TEC CORPORATION All rights reserved
4 - 98
Fig. 4-276
One-way bearing
Mark side Washer
Fig. 4-277