Image Quality Adjustment (Fax Function) - Toshiba e-STUDIO556 Service Manual

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO556:

Table of Contents

Image Quality Adjustment (FAX Function)

Density adjustment

Adjusts the center density and the variation of density adjustment buttons.

Original mode

While pressing [0] and [5] simultaneously, turn the power ON.

Key in a code and press the [START] button.

Key in an adjustment value.

(To correct the keyed-in value, press the [C] button.)

Press the [OK] or [INTERRUPT] button to store the value. The equipment goes back to the ready

o set it again, repeat step (2) to (4).

Turn the power OFF.

If possible, perform a Fax transmission and check the adjusted density with the image on the

recipient's side.

e-STUDIO556/656/756/856(Ver03)

Item to be adjusted

Manual density center

Automatic density mode

The larger the value is, the darker the

image becomes.

Acceptable values: 0 to 255

(Default: 128)

< Adjustment Mode (05) >

Table of Contents