[E580] Paper stopping at reverse section
Classification
Paper transport jam
Check item
Reverse sensor-1, 2
(S23, S24)
Reverse motor
(M19)
LGC board
Drive unit, Rollers
Replace parts
Reverse sensor-1, 2
Reverse motor
LGC board
Rollers
[E590] Paper stopping at exit section
Classification
Paper transport jam
Check item
Exit motor
(M18)
LGC board
Drive unit, Rollers
Replace parts
Exit motor
LGC board
Rollers
© 2012 TOSHIBA TEC CORPORATION All rights reserved
The trailing edge of paper does not pass the reverse sensor-1 or reverse
sensor-2 after its leading edge has reached the reverse sensor-1 or
reverse sensor-2.
•
Sensor check (Perform the input check: 03-[FAX]OFF/[7]/[E], /[7]/[D])
•
Connector check
•
Harness check.
•
Motor check (Perform the output check: 03-126)
•
Speed check (05-4538, 05-4539, 05-4540
•
Connector check
•
Harness check.
•
Connector check (CN335)
•
Board check.
•
Gear check
•
Roller check
The trailing edge of paper does not pass the exit sensor after its leading
edge has reached the exit sensor.
•
Motor check (Perform the output check: 03-120)
•
Connector check
•
Harness check.
•
Connector check (CN336)
•
Board check.
•
Gear check
•
Roller check
8 - 53
Error item
Measures
Remarks
Error item
Measures
Remarks
e-STUDIO556/656/756/856(Ver03)
ERROR CODE AND TROUBLESHOOTING
8