Paper Dust Removal Brush 2 (For The Metallic Registration Roller) - Toshiba e-STUDIO556 Service Manual

[ 3 ] Paper dust removal brush 1 (for the rubber registration roller)
(1) Remove 1 screw and take off the paper dust
removal brush.
4.5.8

Paper dust removal brush 2 (for the metallic registration roller)

(1) Take off the developer unit.
( P.4-73 "4.8.8 Developer unit")
(2) Remove 1 screw and take off the paper dust
removal brush.
4.5.9 Registration motor (M16)
(1) Take off the SYS board.
( P.4-5 "4.1.13 Rear cover")
(2) Remove 3 screws and take off the flywheel.
(3) Remove 3 screws and take off the motor with
the bracket.
(4) Remove 2 screws and take off the motor.
e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
Paper dust removal brush-2
Registration motor
Screw
© 2012 TOSHIBA TEC CORPORATION All rights reserved
4 - 48
Paper dust removal brush-1
Fig. 4-136
Fig. 4-137
Screw
Fig. 4-138