Toshiba e-STUDIO556 Service Manual page 626

[CCE1] Inserter fan motor abnormality
Is the harness between the inserter control board and inserter fan normal?
NO
YES
Is the conductor pattern around Q11, Q16 and CN8 on the inserter control board short
circuited or open circuited?
NO
YES
Replace the inserter control board.
[CDE0] Paddle motor abnormality
Is the paddle home position sensor (PI26) working normally?
NO
YES
Is the wiring between the finisher controller PC board and the paddle motor (M14) correct?
YES
NO
Is the paddle drive mechanism normal?
YES
NO
Is the problem solved by replacing the paddle motor?
NO
YES
END
e-STUDIO556/656/756/856(Ver03)
ERROR CODE AND TROUBLESHOOTING
Replace the harness.
Replace the inserter fan.
Replace the sensor.
Correct the wiring.
Fix the mechanism.
Replace the finisher controller PC board.
8 - 118
© 2012 TOSHIBA TEC CORPORATION All rights reserved