Toshiba e-STUDIO556 Service Manual page 645

Check item
Setting
[F131] Error due to damage to filtering setting file
Classification
Other service call
Check item
Setting
Replace parts
HDD
[F140] ASIC format error
Classification
Other service call
Check item
SYS board
Main memory
Replace parts
SYS board
Main memory
[F200] Data Overwrite Enabler (GP-1070) is disabled
Classification
Other service call
© 2012 TOSHIBA TEC CORPORATION All rights reserved
Compare the serial number of the equipment with a number
displayed in 08-9601
If they are different, enter the correct serial number at 08-9601.
The filtering function is not working properly due to the damage to the file
for the filtering setting.
1. Check the bad sector of the HDD (08-9072). If the result is "NG",
replace the HDD.
Note:
It may take more than 30 minutes to finish the checking.
2. Perform [3] + [C] + [POWER] -> [3], and then reinstall the HDD
software.
Note:
User data will be deleted when [3] + [C] + [POWER] -> [3] is
performed.
ASIC formatting fails or memory acquiring fails when software is formatted
• Connector check
• Board check
• Check the installation
• Main memory check
8 - 137
Measures
Error item
Measures
Remarks
Error item
Measures
Remarks
Error item
e-STUDIO556/656/756/856(Ver03)
ERROR CODE AND TROUBLESHOOTING
8