Toshiba e-STUDIO556 Service Manual page 551

Replace parts
1st drawer transport clutch
LGC board
Rollers
[E230] 1st drawer transport jam (paper not reaching 1st drawer transport sensor)
Classification
Paper transport jam
Check item
1st drawer transport sensor (S33)
1st drawer transport clutch (CLT5)
LGC board
Drive unit, Rollers
Replace parts
1st drawer transport sensor
1st drawer transport clutch
LGC board
1st drawer transport roller
[E240] 2nd drawer transport jam (paper not reaching 2nd drawer transport sensor)
Classification
Paper transport jam
Check item
2nd drawer transport sensor (S39) •
2nd drawer transport clutch (CLT5) •
LGC board
Drive unit, Rollers
© 2012 TOSHIBA TEC CORPORATION All rights reserved
Paper not reaching 1st drawer transport sensor
• Sensor check (Perform the input check: 03-[FAX]OFF/[1]/[C])
• Connector check
• Harness check.
• Clutch check (Perform the output check: 03-229)
• Connector check
• Harness check.
• Connector check (CN327, CN329)
• Board check.
• Gear check
• Roller check
Paper not reaching 2nd drawer transport sensor
Sensor check (Perform the input check: 03-[FAX]OFF/[2]/[C])
• Connector check
• Harness check.
Clutch check (Perform the output check: 03-230)
• Connector check
• Harness check.
• Connector check (CN327, CN329)
• Board check.
• Gear check
• Roller check
8 - 43
Remarks
Error item
Measures
Remarks
Error item
Measures
e-STUDIO556/656/756/856(Ver03)
ERROR CODE AND TROUBLESHOOTING
8