Error In Printer Function - Toshiba e-STUDIO556 Service Manual

8.3.16

Error in Printer Function

Printer function error (when GM-1250/4180 or GM-2270 is installed)
[4011] Print job cancellation
Classification
Printer function error
Check item
Setting
[4021] Print job power failure
Classification
Printer function error
Check item
Setting
[4031] HDD full failure during printing
Classification
Printer function error
Check item
Setting
[4041] User authentication error
Classification
Printer function error
Check item
Setting
[4042] Department authentication error
Classification
Printer function error
© 2012 TOSHIBA TEC CORPORATION All rights reserved
This message appears when deleting the job on the screen.
When there are running jobs, perform the job in error again after the
completion of the running jobs.
If the error still occurs, turn the power OFF and then back ON, and perform
the job again.
Reduce the number of pages of the job in error and perform the job again.
Check if the server or local disk has a sufficient space in disk capacity.
Perform the authentication or register as a user, and then perform the
printing again.
8 - 167
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures
Error item
e-STUDIO556/656/756/856(Ver03)
ERROR CODE AND TROUBLESHOOTING
8