Toshiba e-STUDIO556 Service Manual page 558

[E550] Paper remaining jam at paper transport path
Classification
Paper transport jam
Check item
Jamming transport path
Feed or transport roller possibly
causing multiple feeding
Sensor in the jamming area
LGC board
Replace parts
Feed or transport roller possibly
causing multiple feeding
Sensor in the jamming area
LGC board
Relation between the jamming area and the corresponding sensors and covers
Jamming area
Registration area
Exit/Reverse area
Reverse transport area
Paper feeding area
e-STUDIO556/656/756/856(Ver03)
ERROR CODE AND TROUBLESHOOTING
Paper is remaining on the paper transport path when the printing has
finished. (Jam caused by a multiple paper feeding)
Open the cover of the unit/area whose picture is flashing on the control
panel and remove any paper on the transport path.
Check the feed roller.
• Sensor check (Refer to the table below)
• Harness check
• Connector check
• Connector check
• Board check
Refer to the table below
Sensor
Registration sensor
Exit sensor
Reverse sensor-1
Reverse sensor-2
Fuser transport sensor
Horizontal transport sensor-1
Horizontal transport sensor-2
Horizontal transport sensor-3
1st drawer feed sensor
2nd drawer feed sensor
3rd drawer / tandem LCF feed sensor
4th drawer feed sensor
1st drawer transport sensor
2nd drawer transport sensor
3rd drawer / tandem LCF transport sensor
4th drawer transport sensor
Intermediate transport sensor
8 - 50
Error item
Measures
Remarks
Test mode / Input check
03-[FAX]ON/[4]/[E]
03-[FAX]OFF/[7]/[B]
03-[FAX]OFF/[7]/[E]
03-[FAX]OFF/[7]/[D]
03-[FAX]OFF/[7]/[C]
03-[FAX]OFF/[9]/[F]
03-[FAX]OFF/[9]/[G]
03-[FAX]OFF/[9]/[H]
03-[FAX]OFF/[1]/[D]
03-[FAX]OFF/[2]/[D]
03-[FAX]OFF/[3]/[D]
03-[FAX]OFF/[4]/[D]
03-[FAX]OFF/[1]/[C]
03-[FAX]OFF/[2]/[C]
03-[FAX]OFF/[3]/[C]
03-[FAX]OFF/[4]/[C]
03-[FAX]OFF/[1]/[A]
© 2012 TOSHIBA TEC CORPORATION All rights reserved