Toshiba e-STUDIO556 Service Manual page 550

Check item
1st drawer transport sensor (S33)
Each transport clutch
(CLT5, 7, 9, 11)
LGC board
Drive unit, Rollers
Replace parts
1st drawer transport sensor
Each transport clutch
LGC board
Rollers
[E201] 1st drawer transport jam (paper not reaching intermediate transport sensor)
[E211] 2nd drawer transport jam (paper not reaching intermediate transport sensor)
[E301] 3rd drawer transport jam (paper not reaching intermediate transport sensor)
[E331] 4th drawer transport jam (paper not reaching intermediate transport sensor)
[E3C1] Tandem LCF transport jam (paper not reaching intermediate transport sensor)
[E261] Option LCF transport jam (paper not reaching intermediate transport sensor)
[E2A1] Transport jam during duplex printing (paper not reaching intermediate transport sensor)
Classification
Paper transport jam
Check item
Intermediate transport sensor
(S17)
Transport motor (M17)
1st drawer transport clutch (CLT5)
LGC board
Drive unit, Rollers
Replace parts
Intermediate transport sensor
Transport motor
e-STUDIO556/656/756/856(Ver03)
ERROR CODE AND TROUBLESHOOTING
• Sensor check (Perform the input check: 03-[FAX]OFF/[1]/[C])
• Connector check
• Harness check.
• Clutch check (Perform the output check: 03-229/230/231/225)
• Connector check
• Harness check.
• Connector check (CN341)
• Board check.
• Gear check
• Roller check
Paper not reaching intermediate transport sensor
• Sensor check (Perform the input check: 03-[FAX]OFF/[1]/[A])
• Connector check
• Harness check.
• Motor check (Perform the output check: 03-133, stop 03-183)
• Connector check
• Harness check.
• Clutch check (Perform the output check: 03-229)
• Connector check
• Harness check.
• Connector check (CN327, CN329)
• Board check.
• Gear check
• Roller check
8 - 42
Measures
Remarks
Error item
Measures
Remarks
© 2012 TOSHIBA TEC CORPORATION All rights reserved