Finisher Related Service Call - Toshiba e-STUDIO556 Service Manual

8.3.13

Finisher related service call

[CB10]
Feed motor abnormality
Classification
Finisher related service call
Check item
Second feed motor (M8)
Shutter closed detecting switch
(MS4)
Shutter open sensor (PI5)
Safety zone switch (MS3)
Shutter upper/lower bar
Finisher control board
Replace parts
Second feed motor
Shutter closed detecting switch
Shutter open sensor
Safety zone switch
Finisher control board
[CB20]
Delivery motor abnormality
Classification
Finisher related service call
Check item
Delivery motor
Delivery motor clock sensor (PI10) •
Finisher control board
Replace parts
Delivery motor
e-STUDIO556/656/756/856(Ver03)
ERROR CODE AND TROUBLESHOOTING
• Motor check
• Connector check
• Harness check
• Switch check
• Connector check
• Harness check
• Sensor check
• Connector check
• Harness check
• Switch check
• Connector check
• Harness check
• Move check
• Connector check
• Board check
• Motor check
• Connector check
• Harness check
Sensor check
• Connector check
• Harness check
• Connector check
• Board check
8 - 102
Error item
Measures
Remarks
Error item
Measures
Remarks
© 2012 TOSHIBA TEC CORPORATION All rights reserved