Toshiba e-STUDIO556 Service Manual page 474

[ 2 ] Operational screen
1. Main screen
9
Displaying of the number of print / develop pages (Page/D. cnt), drive counts (Cnt.) and
1
previous replacement date (Chg.) for a chosen unit
When the replacement date for the sub unit is different, press the [SUB UNIT] button to move
to the sub screen and see each information, otherwise information is not displayed
Moving to the next/previous page
2
Displaying of the standard number of drive counts to replace the unit parts
3
Displaying of the present drive counts
4
"*" is displayed next to the present number when the number of drive counts has exceeded its
PM standard number.
Displaying of the present number of print / develop pages
5
When there are differences among the sub units (parts), "_" is displayed and "CHECK
SUBUNIT" is displayed at the top
"*" is displayed next to the present number when the number of print / develop pages has
exceeded its PM standard number.
Displaying of the standard number of print / develop pages to replace the unit parts
6
Moving to the sub screen of the selected unit
7
Moving to the clear screen to clear the selected unit counters (4 and 5), including all sub unit
8
(parts) counters belonging to that unit
When the unit is not selected, all counters are cleared.
Displaying of the main unit name
9
e-STUDIO556/656/756/856(Ver03)
PREVENTIVE MAINTENANCE (PM)
1
8 7
Fig. 7-3
7 - 6
6 5 4
© 2012 TOSHIBA TEC CORPORATION All rights reserved
3 2