Re-Registration Of The Electronic License Key With The One-Time Dongle - Toshiba e-STUDIO556 Service Manual

9.4 Re-registration of the Electronic License Key with the one-
time dongle
9.4.1 Outline
The Electronic License Key registered using the one-time dongle can be re-registered only in the same
equipment.
When the SYS board or the SRAM board is replaced, follow the procedures of the re-registration below.
9.4.2 Re-registration method
1. After the SYS board or SRAM board is replaced, set up the equipment referring "5.4.2 [4]
Precautions and Procedures when replacing the SYS board" or "5.4.2 [5] Precautions and
Procedures when replacing the SRAM board" in chapter "5.4.2 Precautions, Procedures and
Settings for Replacing PC Boards and HDD".
2. When the Electronic License Key is re-registered using the one-time dongle referring to "Reinstall
options" (5.4.2 [4] [D] or 5.4.2 [5] [H]), perform 08-3840 (Electronic License Key Registration) with
the dongle registered previously.
3. When the authentication succeeds, the re-registration screen (available numbers of the re-
registration are displayed after the option names) appears.
4. Perform the re-registration in the same manner as the regular registration.
Note:
This procedure is available only for the one-time dongle used for the first registration so that the
information of the model is re-registered using the same one.
When the Electronic License Key is registered, identify the combination of the one-time dongle
and the equipment registered using it.
9.4.3 Re-registration method when the equipment is replaced due to a
malfunction
When the equipment is replaced because of a malfunction, the electronic key registered in the
equipment following the procedure below can be returned to a one-time dongle and registered in
another piece of equipment.
Note:
The electronic key for IPsec option (GP-1080) cannot be re-registered.
1. Start up the equipment in the Setting mode (08).
2. Perform 08-3870 to confirm the registered electronic key.
3. Insert the one-time dongle used to register the electronic key to the USB port.
Note:
Only the one-time dongle used to register the electronic key is available.
4. Perform 08-3841. The electronic keys that can be returned to the one-time dongle are displayed.
5. Select the electronic key to return, then press the [MOVE] button.
Note:
The electronic key is deleted, and it is saved in the one-time dongle as the available key.
6. After the equipment is replaced, start it up in the setting mode (08).
7. Insert the one-time dongle to the USB port, then perform 08-3840.
8. Perform the same procedure as the regular registration.
© 2012 TOSHIBA TEC CORPORATION All rights reserved
REPLACEMENT OF PC BOARDS / HDD
9 - 33
e-STUDIO556/656/756/856(Ver03)
9