Toshiba e-STUDIO556 Service Manual page 611

Replace parts
Delivery motor clock sensor
Finisher control board
[CB30]
Tray lift motor abnormality
Classification
Finisher related service call
Check item
Tray1 lifting motor(M5)
Tray 1 home position sensor(PI8)
Tray 1
Finisher control board
Replace parts
Tray1 lifting motor
Tray 1 home position sensor
Finisher control board
[CB40]
Alignment motor (rear) abnormality
Classification
Finisher related service call
Check item
Alignment motor (M3)
Alignment guide home position
sensor (PI6)
Alignment guide
Finisher control board
Replace parts
Alignment motor
Alignment guide home position
sensor
© 2012 TOSHIBA TEC CORPORATION All rights reserved
• Motor check
• Connector check
• Harness check
• Sensor check
• Connector check
• Harness check
• Move check
• Connector check
• Board check
• Motor check
• Connector check
• Harness check
• Sensor check
• Connector check
• Harness check
• Move check
• Connector check
• Board check
8 - 103
Remarks
Error item
Measures
Remarks
Error item
Measures
Remarks
e-STUDIO556/656/756/856(Ver03)
ERROR CODE AND TROUBLESHOOTING
8