Toshiba e-STUDIO556 Service Manual page 433

(8) Install 1 fixing screw (rear side) on the right-
hand hinge bracket.
(9) Insert a washer, and install 1 fixing screw
(rear side) on the left-hand hinge bracket.
(10) Tighten the 2 fixing screws (front side) on the
hinge bracket.
(11) Open the RADF and remove 2 positioning
pins.
© 2012 TOSHIBA TEC CORPORATION All rights reserved
Fig. 6-67
Fig. 6-68
Fig. 6-69
Fig. 6-70
6 - 69
e-STUDIO556/656/756/856(Ver03)
ADJUSTMENT
6