Toshiba e-STUDIO556 Service Manual page 955

Sub
05/08 Mode Element
element
05 Adjustmen Image Density FAX(black)
t mode Processing adjustment
05 Adjustmen Image Image FAX (black)
t mode Processing contrast
adjustment
05 Adjustmen Image Image FAX (black)
t mode Processing contrast
adjustment
05 Adjustmen Image Image FAX (black)
t mode Processing contrast
adjustment
05 Adjustmen Image Image FAX (black)
t mode Processing contrast
adjustment
05 Adjustmen Image Image FAX (black)
t mode Processing contrast
adjustment
05 Adjustmen Image Blank
t mode Processing page
judgment
threshold
adjustment
05 Adjustmen Image ACS
t mode Processing judgment
threshold
05 Adjustmen Image Stroke PS/PDF automatic
t mode Processing adjustment stroke adjustment
Item Subitem Code
Automatic density 7543
adjustment
7594
7594
7594
7594
7594
7618
7630
600dpi 8239
Sub- Default Acceptable
Details
code value value
Photo 128 0-255
0 Beam level 0/4 0 0-255
1 Beam level 1/4 32 0-255
2 Beam level 2/4 64 0-255
3 Beam level 3/4 94 0-255
4 Beam level 4/4 200 0-255
PPC/SCN 128 0-255
PPC/SCN 70 0-255
0 Default setting 0 0-1
52
RAM Contents
SYS When the value increases, the image becomes darker.
M The smaller the value, the narrower the beam width
becomes and the smaller the dots are reproduced.
M The smaller the value, the narrower the beam width
becomes and the smaller the dots are reproduced.
M The smaller the value, the narrower the beam width
becomes and the smaller the dots are reproduced.
M The smaller the value, the narrower the beam width
becomes and the smaller the dots are reproduced.
M The smaller the value, the narrower the beam width
becomes and the smaller the dots are reproduced.
SYS The larger the value, the more the original tends to be
judged as a blank page.
SYS The larger the value, the more the original tends to be
judged as black even in the auto color mode.
The smaller value, the more it tends to be judged as
color.
SYS This code is used to change the width of fine lines in PS
and PDF printing. Automatic stroke adjustment is the
function that prevents the width from changing
according to the position.
This code sets whether automatic stroke adjustment is
enabled or disabled if it is not included in the print data.
If this setting is disabled, there will be an increase in
cases in which the width of fine lines becomes thicker
by 1 dot when they are printed.
0: Disabled
1: Enabled
Proce Servic
dure e UI
1 Yes
4 Yes
4 Yes
4 Yes
4 Yes
4 Yes
1 Yes
1 Yes
4