Toshiba e-STUDIO556 Service Manual page 278

(4) Remove 1 E-ring and 1 bushing.
(5) Remove 4 screws and take off the platen
guide.
(6) Take off the reading start roller.
Note:
When installing the reading start roller, refix
the loosened screw and tighten the belt
tension.
e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
Bushing
E-ring
© 2012 TOSHIBA TEC CORPORATION All rights reserved
4 - 132
Fig. 4-374
Fig. 4-375
Fig. 4-376