Toshiba e-STUDIO556 Service Manual page 340

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO556:

Table of Contents

[D] 3. SRAM Re-Initialize Support

Select this to clear an F900 error which occurred when SYS-SRAM and the SYS board are replaced at

the same time, since this error cannot be cleared in the 3C mode.

After updating with a download jig and clearing the SRAM data, select this item.

After clearing the SRAM data, initialize SRAM following its replacement procedure.

e-STUDIO556/656/756/856(Ver03)

SELF-DIAGNOSTIC MODE

Chapters

Table of Contents