Toshiba e-STUDIO556 Service Manual page 698

[7134]
Department data import partial failure
Classification
Maintenance error
Check item
Setting
[7139]
Certification from SCEP server acquisition failure
Classification
Maintenance error
Check item
Setting
[713B]
Certification import failure
Classification
Maintenance error
Check item
Setting
[713D]
User Combined data import failure
Classification
Maintenance error
Check item
Setting
[713F]
All data (Template/AddressBook/MailBox) import failure
Classification
Maintenance error
Check item
Setting
e-STUDIO556/656/756/856(Ver03)
ERROR CODE AND TROUBLESHOOTING
A part of the department data was not imported.
There is a possibility that the amount of department data has exceeded the
maximum for registration during the import or the file contains invalid data.
Check if you are importing a valid file and also that the amount of
department data does not exceed the maximum.
Failed to import the certificate by SCEP
Check the SCEP server and the SCEP setting (automatic) in TopAccess
Administration > Security > Certificate Management.
Failed to import the certificate
Certificate may have a problem or be corrupted. Check the certificate and
perform the job again.
The import of combined user information failed.
Check if you are importing a valid file.
The import of all data (templates, Address Book, Mailbox) failed.
Check if you are importing a valid file.
8 - 190
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures
© 2012 TOSHIBA TEC CORPORATION All rights reserved