7
PROGRAMS REPLACEMENT
7.1.5 How to reuse a program of a PLC type that is not supported by GX Developer
Reuse of a program of a PLC type that is not supported by GX Developer is possible using "A/QnA to Q
conversion support tool". Follow the steps below.
(1) CPU modules that are not supported by GX Developer
The CPU modules listed below are not supported by GX Developer.
Change PLC type to convert it to the program of the CPU module that is supported by GX Developer in
advance, by using "A/QnA to Q conversion support tool".
• A0J2CPU
• A3HCPU
(2) Operating procedure
1) Start up "A/QnA to Q conversion support tool".
2) Select "A0J2 conversion support tool execute".
3) Go to "File" and click "New", then select the corresponding PLC type.
• A1CPU
• A2CPU(-S1)
• A52GCPU
• A3VCPU
• A3CPU
• A73CPU
• A3MCPU
7
- 15