Appendix 5
This section describes how to set parameters with GX Developer.
Appendix 5.1
When using GX Developer, configure settings in the windows below:
Window name
I/O assignment
Switch setting for I/O and
intelligent function module
(1) I/O assignment setting
Select "I/O assignment" from "PLC parameter".
Project window [Parameter] [PLC parameter] "I/O assignment" tab
Item
Type
Model name
Points
Start XY
116
When Using GX Developer
Operating GX Developer
Set the type of the module to connect and the range of I/O
signals.
Set the number of transmission points of the master module.
Select "Intelli."
Enter the model name.
Select "32 points".
Enter any start I/O number of the master module.
Application
Description
Reference page
Page 116, Appendix
5.1 (1)
Page 117, Appendix
5.1 (2)