Troubleshooting When Using Gx Developer - Mitsubishi Electric MELSEC Q Series Quick Start Manual

 Troubleshooting when using GX Developer
Check the problem and respond according to the following list.
Problem
The CPU module cannot
communicate with the
personal computer (GX
Developer).
(Communication error
message)
Programs cannot be written.
Check
Is the correct cable used?
Is the GX Developer
transfer setup properly
set?
Is the USB driver properly
installed?
Has a write protect
password been set in GX
Developer?
Action
Check the cables.
GX Developer Version 8
Operating Manual: SH-080373E
Check the transfer setup.
7 Writing Programs (P.21)
Properly install the USB driver, referring the
following manual.
GX Developer Version 8
Operating Manual (Startup):
SH-080372E
Unlock the password.
GX Developer Version 8
Operating Manual: SH-080373E
29