Settings For A Standby Master Station - Mitsubishi Electric MELSEC iQ-R Series User Manual

Settings for a standby master station

Connect the engineering tool to the CPU module on the standby master station and set the parameters.
1.
Set the CPU module and add the module labels of the CPU module. The setting method of the CPU module and addition
method of the module label are the same as those of the master station. ( Page 87 Setting in the master station)
2.
Set the master/local module as follows.
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]
3.
Add the module labels of the master/local module. The addition method of the module label is the same as that of the
master station. ( Page 87 Setting in the master station)
4.
Set the items in "Required Settings" as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ61BT11]  [Required settings]
5.
Set the own station setting as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ61BT11]  [Basic Settings]  [Own station Settings]
3 PROGRAMMING
90
3.3 Communication Example Using the Standby Master Function