Clock Display; Set Time - Videotek TVM9100PKG Installation And Operation Handbook

10. Use the UP and DOWN NAVIGATION buttons to move the cursor to select 0-9
(third digit in the current password). When the correct password is entered,
LOCKED changes to UNLOCK will appear.
11. Use the RIGHT and LEFT NAVIGATION buttons to move the cursor to
UNLOCK.
12. Press the ENT button. The Enter New Password screen appears. It is time to
ENTER A NEW PASSWORD.
13. Use the UP and DOWN NAVIGATION buttons to select 0-9 (first digit in the new
password).
14. Use the RIGHT NAVIGATION button to move the cursor to the second password
number.
15. Use the UP and DOWN NAVIGATION buttons to move the cursor to select 0-9
(second digit in the new password).
16. Use the RIGHT NAVIGATION button to move the cursor to the third password
number.
17. Use the UP and DOWN NAVIGATION buttons to move the cursor to select 0-9
(third digit in the new password).
18. Use the RIGHT NAVIGATION button to move the cursor to select ACCEPT.
19. Press the ENT button. The new password has been set.

Clock Display

The Clock Display menu is used to toggle the clock display on the Main Title Bar off
and on.

Set Time

When selecting Set Time, the Enter New Time Screen, shown in Figure 4-6, appears.
The Enter New Time screen is used to set the internal clock of the unit. Press the UP
and DOWN NAVIGATION button to change the values of each time selection. Press
the RIGHT and LEFT NAVIGATION buttons to move between the Hour, Minute,
Second, Month, Day, Year, ACCEPT, and CANCEL selections. Once the internal date
and time is entered, press ENT when the accept button is highlighted to save the
settings.
Figure 4-6. Enter New Time Screen
Global Setup Menu Functions
TVM Series Installation and Operation Handbook
Copyright © 2008, Harris Corporation
183