Global Setup Menu Functions
Output Level
The Output Level submenu is used to determine the monitor output level. The default
monitor output level is 1V p-p. The other output level selection is 0.7V p-p.
Monochrome Display
The Monochrome Display submenu is used to change between a color and
monochrome display. The default Monochrome Display setting is OFF.
LCD Backlight
The LCD Backlight submenu is used to determine if the backlight brightness level. To
lower the backlight level select MIN. The default backlight level is MAX.
Communications Setup
The Communications Setup menu is used to configure the communication between the
TVM and any peripheral hardware and Software connected to the unit.
RCU Port
The RCU Port Submenu controls the termination and baud rate for the Remote Port on
the back of the TVM.
Termination
One RCU-1000 connects to multiple TVM instruments using a multidrop straight
through wire with RJ-11 connectors (not a standard telephone wire) that connects to the
REMOTE ports on the back of the TVMs and to the TO MAIN UNIT connector on the
back of the RCU. All TVMs must have unique unit IDs, as described in Unit ID on
page 180. The REMOTE port must be terminated on the last TVM or TVM Series
instrument.
Baud Rate
The Baud Rate is used to set the baud rate for the RCU port. If the Baud Rate is not
correct, the TVM will not communicate with the device that is connected to the
REMOTE Port.
IP Configuration
The IP CONFIGURATION menu is used to configure the TVM for Ethernet
communication. The Ethernet interface provides a high-speed communication link to
the third party applications (such as SNMP) over standard LAN and Internet networks.
The interface conforms to industry Ethernet standards:
• Connection via a standard RJ45 socket
• Automatic detection and switching between 10BaseT and 100BaseT
• SNMP Communications
• TCP/IP stack is fully compliant with RFC2500, "Internet Official Protocol
Standards"
TVM Series Installation and Operation Handbook
177
Copyright © 2008, Harris Corporation
Need help?
Do you have a question about the TVM9100PKG and is the answer not in the manual?