Presets; Storing Presets; Preset *8 (Factory Preset); Preset Setup Menu - Videotek TVM9100PKG Installation And Operation Handbook

Presets

Presets are used to store menu configurations and display settings. A
total of 15 presets can be stored in the TVM. Press PRESET button 1 to
8 to select a preset from the associated bank of presets. Preset bank A
contains presets 1 to 8. Preset bank B contains presets 9 to 16. Press the
STAR button to toggle between preset banks A and B.
The STAR button is low tally when using the first bank of presets
containing Presets 1 to 8, and high tally when using the second bank of
presets containing Preset 9 to 16. Press and hold the * button to access
the preset menu. The Preset menu is described in Table 3-62. Preset *8
is locked as the factory default, and cannot be changed. For more
information on Preset *8, see page 130.

Storing Presets

NOTE: Freeze Mode configurations cannot be stored in a preset. Also, any data that is frozen
in freeze mode cannot be stored in a preset. For more information on Freeze Mode, see
Freeze and Freeze + Live Mode on page 133.
To store a preset in bank A, press and hold the desired preset number button (1 to 8) for
three seconds. The number button is high tally upon release after holding the button for
three seconds. Also, a beep will sound if the Aural alert is enabled in the SYSTEM
SETUP menu.
To store a preset in bank B, first press the STAR till the STAR button is high tally.
Once the STAR button is high tally, press and hold the desired preset number button (1
to 7) for three seconds. The number button is high tally upon release.
Recalling Presets
NOTE: Information must be stored in a preset location before being recalled.
Press any number from 1 to 8 to directly select the stored preset in bank A. Press
STAR and any number from 1 to 7 to directly select the stored preset in bank B. Press
preset *8 to select the factor default settings. Preset STAR 8 is never empty and will
recall the factory default settings.
If a preset does not exist for the selected number when selected, nothing happens.

Preset *8 (Factory Preset)

Press Preset 8 in bank B (when the * is high tally) to access the factory-preset mode.
This preset contains the factory default settings.

Preset Setup Menu

Press and hold the * button to access the preset menu. The Preset Setup menu is
described in Table 3-62.
130
General Operation
TVM Series Installation and Operation Handbook
Copyright © 2008, Harris Corporation