Graticule Intensity; Cursor Intensity; Xga Freeze; Monitor - Videotek TVM9100PKG Installation And Operation Handbook

color can be used for multiple functions, each function can use one color. Black cells in
the Display Color Screen indicate color selections that cannot be made for specific
functions.
NOTE: The background color is selectable. There is a 50% reduction in the luminance level of
the background relative to the same color of other attributes (e.g. text or graticules). This is to
assure a contrast when the background color selection is the same, such as red enabled
alarms over a red background.

Graticule Intensity

The Graticule Intensity submenu is used to raise or lower the brightness of the
displayed graticule.

Cursor Intensity

The Cursor Intensity submenu is used to raise or lower the brightness of the displayed
cursor.

XGA Freeze

The XGA Freeze Setup menu is used to determine the factors for when a display is
frozen.
Freeze Trigger From Clock
The Freeze Trigger From Clock is used to creates a frame capture at a specified time.
Freeze on Alarm
Freeze on Alarm is used to create a frame capture when one or more user-selectable
alarms are triggered. The FREEZE ON ALARM selections are used to automatically or
manually return from the frozen picture to the active picture after a frame capture is
performed. Pressing the DISP button will override the FREEZE FROM CLOCK and
FREEZE ON ALARM menu selections.
• If FREEZE ON ALARM is set to FIRST ALARM MANUAL RETURN TO LIVE
the frozen screen is immediately displayed when an alarm is triggered. The DISP
button must be pressed to return the screen to the active display.
• If FREEZE ON ALARM is set to FIRST ALARM AUTO RETURN TO LIVE, the
active picture replaces the frame capture. No other captures are performed.

Monitor

The monitor menu is used to select the aspect ratio, screen saver, and output level for
the monitor. The Monitor menu can also be used to change the entire color display to
monochrome.
Screen Saver
The screen saver is used to provide a blank screen after there is no active for the
specified duration. The time it takes for the screen saver to activate can range from 1 to
60 minutes.
176
Global Setup Menu Functions
TVM Series Installation and Operation Handbook
Copyright © 2008, Harris Corporation