Videotek TVM9100PKG Installation And Operation Handbook page 206

14. Press the ENT button to toggle between Lock and Unlock on the highlighted Preset
Number selection.
15. Repeat the previous two steps for any other selection needed to be made.
16. After the settings are complete, press the EXIT button to exit the menu.
(If the front panel was locked in the steps above) The front panel is locked once EXIT
is pressed. Any button pressed besides the SETUP button will invoke the PANEL
LOCKED OUT message. Subsequent presses of the SETUP button will invoke the
ENTER PASSWORD setup screen. The panel will be unlocked and the Setup menu
can only be accessed after a valid password has been entered.
To unlock the locked front panel:
NOTE: The default password is 0-0-0.
1. Press the SETUP button until the Enter Password Screen appears.
2. Use the UP and DOWN NAVIGATION buttons to move the cursor to select 0-9
(first digit in password).
3. Use the RIGHT NAVIGATION button to select the second password number.
4. Use the UP and DOWN NAVIGATION buttons to move the cursor to select 0-9
(second digit in password).
5. Use the RIGHT NAVIGATION button to select the third password number.
6. Use the UP and DOWN NAVIGATION buttons to move the cursor to select 0-9
(third digit in password). When the password is correctly entered, LOCKED will
change to UNLOCK.
7. Press the RIGHT NAVIGATION button to select UNLOCK and press the ENT
button to unlock the front panel. Press EXIT at any time to keep the front panel
locked.
To change the password:
NOTE: The default password is 0-0-0.
1. Press the SETUP button to display the SETUP menu.
2. Use the NAVIGATION buttons to move the cursor to the COMMUNICATION
SETUP menu.
3. Press the ENT button.
4. Use the NAVIGATION buttons to move the cursor to the CHANGE PASSWORD.
5. Press the ENT button. The Enter Password screen appears.
6. Use the UP and DOWN NAVIGATION buttons to move the cursor to select 0-9
(first digit in the current password).
7. Use the RIGHT NAVIGATION button to move the cursor to the second password
number.
8. Use the UP and DOWN NAVIGATION buttons to select 0-9 (second digit in the
current password).
9. Use the RIGHT NAVIGATION button to select the third password number.
182
Global Setup Menu Functions
TVM Series Installation and Operation Handbook
Copyright © 2008, Harris Corporation