YASKAWA SGD7S Product Manual page 154

Operating Procedure
Use the following procedure to initialize the parameter settings.
1.
Click the Servo Drive Button in the workspace of the Main Window of the Sig-
maWin+.
2.
Select Edit Parameters in the Menu Dialog Box.
The Parameter Editing Dialog Box will be displayed.
3.
Select any parameter of the axis to initialize.
4.
Click the Initialize Button.
5.
Click the OK Button.
Click the Cancel Button to cancel initialization. The Parameter Editing Dialog Box will return.
6.
Click the OK Button.
7.
Turn the power supply to the SERVOPACK OFF and ON again after the parameter set-
tings have been initialized.
This concludes the procedure to initialize the parameter settings.
5.1 Manipulating Parameters (Pn)
5.1.5 Initializing Parameter Settings
5
5-11