YASKAWA SGD7S Product Manual page 12

 Notation Used in this Manual
 Notation for Reverse Signals
The names of reverse signals (i.e., ones that are valid when low) are written with a forward slash (/)
before the signal abbreviation.
Notation Example
BK is written as /BK.
 Notation for Parameters
The notation depends on whether the parameter requires a numeric setting (parameter for numeric
setting) or requires the selection of a function (parameter for selecting functions).
•
Parameters for Numeric Settings
Pn100
Parameter
number
This is the setting range
for the parameter.
•
Parameters for Selecting Functions
Pn002
Parameter
number
Notation Example
n . 0 0 0 0
 Engineering Tools Used in This Manual
This manual uses the interfaces of the SigmaWin+ for descriptions.
xii
Speed Loop Gain
Setting Range Setting Unit
10 to 20,000 0.1 Hz
This is the minimum
unit (setting increment)
that you can set for
the parameter.
Parameter
n. 0
Use the encoder according to encoder specifications.
(default setting)
Use the encoder as an incremental encoder.
n. 1
Use the encoder as a single-turn absolute encoder.
n. 2
The notation "n. " indicates a parameter for selecting functions.
Each indicates the setting for one digit.
The notation shown here means that the third digit from the right is set to 2.
The following format is used to show the individual bits of a parameter
setting: b.
The individual bits of a parameter setting have specific meanings, but you
cannot set the bits individually. The individual bits must be converted to a
hexadecimal value to set a parameter.
Refer to the following section for details on settings.
15.1.2 List of Parameters (page 15-3)
Notation Examples for Pn002
Digit Notation
Notation Meaning
Pn002 =
Indicates the first digit from
the right in Pn002.
n. X
Pn002 =
Indicates the second digit
n. X from the right in Pn002.
Pn002 =
Indicates the third digit from
n. X
the right in Pn002.
Pn002 =
Indicates the fourth digit from
n.X
the right in Pn002.
Default Setting When Enabled
400 Immediately
This is when any
This is the
change made to the
parameter setting
parameter will
before shipment.
become effective.
Meaning
.
Numeric Value Notation
Notation
Pn002 =
Indicates that the first digit from
n. 1
the right in Pn002 is set to 1.
Pn002 =
Indicates that the second digit from
n. 1 the right in Pn002 is set to 1.
Pn002 =
Indicates that the third digit from
n. 1 the right in Pn002 is set to 1.
Pn002 =
Indicates that the fourth digit from
n.1 the right in Pn002 is set to 1.
Classification
Tuning
This is the parameter
classification.
When Enabled Classification
After restart Setup
This column explains the
selections for the function.
Meaning