Commissioning Easy Extend; Sinumerik Integrate Run Myscreens - Siemens SINUMERIK 840D sl Operating Manual

18.2.5

Commissioning Easy Extend

The additional devices are managed with an Easy XML script.
References
For further information about configuring, please refer to:
SINUMERIK 828D Commissioning Manual
18.3

SINUMERIK Integrate Run MyScreens

"Run MyScreens" allows you to design your own user interface for machine manufacturer- or
user-specific functional expansions and implement a user-specific layout.
You also have the possibility to modify or replace configured Siemens or machine-
manufacturer user interfaces.
With the newly created user interface, you can process, for example, part programs. The
dialogs are designed directly on the control system.
Grinding
Operating Manual, 05/2017, A5E40869190
3. Press the "Start-up" softkey.
A new vertical softkey bar appears.
4. Press the "Comm. start-up" softkey to start the commissioning.
Before starting, a complete data backup is generated which you can then
use in case of an emergency.
5. Press the "Cancel" softkey if you want to abort the commissioning pre‐
maturely.
6. Press the "Restore" softkey to load the original data.
7. Press the "Device function test" softkey to test the machine manufactur‐
er's intended function.
Software option
To expand the number of dialogs, you require one of the following software options:
● SINUMERIK 828D/840D sl, SINUMERIK Integrate Run MyScreens
● SINUMERIK 840D sl, SINUMERIK Integrate Run MyScreens + Run MyHMI
● SINUMERIK 840D sl, SINUMERIK Integrate Run MyHMI / 3GL
● SINUMERIK 840D sl, SINUMERIK Integrate Run MyHMI / WinCC
Machine manufacturer
Please refer to the machine manufacturer's specifications.
18.3 SINUMERIK Integrate Run MyScreens
Easy XML
395