Commissioning; Requirements - Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

Commissioning

6.1

Requirements

• The connectivity module battery is now connected.
• The Bluetooth interface of the mobile device with Bluetooth Low Energy V4.1 or newer is
activated.
• The function to determine position data in the mobile device is activated, and a valid position
can be determined before onboarding. To do this, before activation a certain preprocessing
time may be required. Further, it should be taken into account that determining the position
in buildings may be faulted. If determining the position data before onboarding was not
successful, then the correct position of the asset cannot be displayed in SIDRIVE IQ Fleet.
(Note: The function to determine position data is not available in every country.)
• The mobile device has an Internet connection via Wi-Fi or GSM/LTE
• There is a Wi-Fi access point to connect the connectivity module to the Internet.
• You have valid access data for "SIDRIVE IQ Fleet".
SIMOTICS CONNECT 400
Operating Instructions, 04/2023, A5E50161952B AL
6
37