Displaying Energy Consumption - Siemens SINUMERIK 840D sl Operating Manual

Ctrl Energy

13.2 Displaying energy consumption

13.2 Displaying energy consumption
You have the option of displaying the actual energy usage values of the individual axes and
the total energy consumption.
Display
Manual
Sentron PAC
Total of drives
Total, machine
The display in the table depends on the configuration.
References
Information on the configuration is provided in the following reference:
System Manual "Ctrl Energy", SINUMERIK 840D sl / 828D
Procedure
272
Meaning
No input

Entering and displaying a fixed value

Displaying a value from a data source

Displaying an actual value measured by a SENTRON PAC device.
Display of the total of all measured drive values.
Addition of the values of all axes as well as a fixed value and Sentron
PAC.
1. Select the "Parameter" operating area and press the "Ctrl Energy" softkey.
- OR -
+ Press the <Ctrl> + <E> keys.
2. Press the "Energy analysis" softkey.
The "SINUMERIK Ctrl-Energy analysis" window is opened.
You obtain a display of the actual active power for all of the axes.
Operating Manual, 02/2011, 6FC5398-6AP40-0BA0
Universal