Parameters For Block Search In The Search Pointer - Siemens SINUMERIK 840D sl Operating Manual

Note
Interruption point
You can load the interruption point in search pointer mode.
4.7.6

Parameters for block search in the search pointer

Parameter
Number of program level
Program:
Ext:
P:
Line:
Type
Search target
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
The Search window closes. The current block will be displayed in the
"Program" window as soon as the target is found.
5. Press the <CYCLE START> key twice.
Processing is continued from the defined location.
Meaning
The name of the main program is automatically entered
File extension
Pass counter
If a program section is performed several times, you can enter the number of
the pass here at which processing is to be continued
Is automatically filled for an interruption point
" " search target is ignored on this level
N no. Block number
Label Jump label
Text string
Subprg. Subprogram call
Line Line number
Point in the program at which machining is to start
Machining the workpiece
4.7 Starting machining at a specific point
131