Parameters For Block Search; Block Search Mode - Siemens SINUMERIK 840D sl Operating Manual

Machine the workpiece
3.6 Starting execution at a specific point
Proceed as follows
3.6.4

Parameters for block search

Parameters in "Search indicator" window
Parameters
Number of program level
Program:
Ext:
P:
Line:
Type
Search target
3.6.5

Block search mode

Set the desired search variant in the "Search mode" window.
The set mode is retained when the the control is shut down. When you activate the "Search"
function after restarting the control, the current search mode is displayed in the title row.
66
1. Enter the complete target path in the input fields
2. Press the "Start search" softkey.
The search is started. Your specified search mode will be taken into
account.
The search window closes. The current block will be displayed in the
program window as soon as the target is found.
3. Press the "CYCLE START" key twice in order to continue execution
from the required position.
Description
The name of the main program is automatically entered.
File extension
Pass counter.
If a program part is performed several times, you can enter the number of the
pass here at which processing is to be continued.
Is automatically filled for an interruption point
" " search target is ignored on this level
N no. block number
Label jump label
Text string
Sub-r. Subroutine call
Row row number
Point in the program at which machining is to start
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
HMI sl Universal