12.2 Alarm Displays
12.2.1 List of Alarms
Alarm
Number
A.F50
FL-1*
FL-2*
FL-3*
FL-4*
FL-5*
FL-6*
CPF00
CPF01
*
These alarms are not stored in the alarm history. They are only displayed on the panel display.
Note: The A.Eb0, A.Eb2 to A.Eb9, and A.EC0 to A.EC2 alarms can occur when a Safety Module is connected.
Refer to the following manual for details.
12-10
Alarm Name
Servomotor Main Circuit
Cable Disconnection
System Alarm
Digital Operator Commu-
nications Error 1
Digital Operator Commu-
nications Error 2
Σ
Σ
AC Servo Drive
-V-Series/
-V-Series for Large-Capacity Models/
No.: SIEP C720829 06)
Alarm Meaning
The Servomotor did not operate or power was
not supplied to the Servomotor even though the
SV_ON (Servo ON) command was input when the
Servomotor was ready to receive it.
An internal program error occurred in the
SERVOPACK.
Communications were not possible between the
Digital Operator (model: JUSP-OP05A-1-E) and
the SERVOPACK (e.g., a CPU error occurred).
Continued from previous page.
Servo-
motor
Stop-
ping
Method
Gr.1
Σ
-7-Series User's Manual Safety Module (Manual
Alarm
Reset
Possi-
ble?
Yes
–
No
–
No