YASKAWA SGD7S-****20A Series Product Manual page 373

 Using the Acceleration as the Mode Switching Condition
• Rotary Servomotors
When the speed reference equals or exceeds the acceleration rate set for the mode switching
level for acceleration (Pn10E), the speed loop is changed to P control.
peed reference
peed
Motor acceleration
+Pn10E
peed 0
- Pn10E
PI P PI control
• Linear Servomotors
When the speed reference equals or exceeds the acceleration rate set for the mode switching
level for acceleration (Pn182), the speed loop is changed to P control.
peed reference
peed
Motor acceleration
+Pn182
Acceleration 0
- Pn182
PI P PI control
 Using the Position Deviation as the Mode Switching Condition
When the position deviation equals or exceeds the value set for the mode switching level for
position deviation (Pn10F), the speed loop is changed to P control.
This setting is enabled only for position control.
peed reference
peed
Po ition deviation
Pn10F
PI P control
Position Integral
The position integral is the integral function of the position loop. It is used for the electronic
cams and electronic shafts when using the SERVOPACK with a Yaskawa MP3000-Series
Machine Controller.
Position Integral Time Constant
Pn11F Setting Range
0 to 50,000
Motor peed
Time
P PI control
Motor peed
Time
P PI control
Motor peed
Time
PI control
Setting Unit Default Setting
0.1 ms
8.13.2 Compatible Adjustment Functions
Position
When Enabled
0 Immediately
8.13 Manual Tuning
8
Classification
Tuning
8-95