Specific Error Codes - Hitachi VSP F1500 User And Reference Manual

Category
Communication for
HORCM
(Recoverable)
Resource
(Unrecoverable)

Specific error codes

The following table lists the specific error codes returned by the following
commands:
•
horctakeover
•
paircurchk, paircreate, pairsplit, pairresync, pairevtwait,
pairvolchk, pairsyncwait, raidvchkset
In this table, "Unrecoverable" indicates errors that cannot be recovered by
reexecuting the command, and "Recoverable" indicates errors that can be
recovered by reexecuting the command.
See the Command Control Interface Command Reference for more
information on error codes for each command.
Category
Volume Status
(Unrecoverable)
Timer
(Recoverable)
Error code
EX_INVCMD Invalid RAID command
EX_ATTHOR Can't be attached to HORC manager
EX_ATTDBG Can't be attached to a Debug layer
EX_COMERR Can't be communicated with HORC manager
EX_ENOMEM Not enough core
Table 9-5 Specific error codes
Error code
EX_ENQVOL Unmatched volume status within the group
EX_INCSTG Inconsistent status in group
EX_INVVOL Invalid volume status
EX_EVOLCE Pair Volume combination error
EX_INVSTP Invalid pair status
EX_VOLCUR S-VOL currency error
EX_VOLCUE Local Volume currency error
EX_VOLCRE Local and Remote Volume currency error
EX_EWSUSE Pair suspended at WAIT state
EX_ENQSIZ Unmatched volume size for pairing
EX_ESVOLD S-VOL denied due to be disabling
EX_EPRORT Mode changes denied due to retention time
EX_EWSTOT Timeout waiting for specified status
Troubleshooting
Command Control Interface User and Reference Guide
Error message
Error message
Value
240
251
250
255
245
Value
236
229
222
235
228
225
224
223
234
212
209
208
233
9-21