Hitachi VSP F1500 User And Reference Manual page 428

Executing/
Error message
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
9-104
raidcom map snapshot
Error code
Async
SSB1 SSB2
2E10 0056
2E10 005B
2E10 005F
2E10 0203
2E10 0211
2E10 9709
2E10 970B
2E10 9713
2E11 800F
2E20 0000
2E20 0008
2E20 000B
2E20 000C
2E20 000D
2E21 8107
2E21 8108
2E21 9010
Troubleshooting
Command Control Interface User and Reference Guide
Description
The specified volume cannot be used for the Thin
Image pair operation because the virtual LDEV ID
is deleted.
The Thin Image pair operation cannot be
performed because the virtual storage machine of
the specified P-VOL is different from the virtual
storage machine of the specified S-VOL.
The command ends abnormally because the
specified S-VOL is assigned to a Thin Image pair.
The operation failed because the setting of the T10
PI attribute is not match between the specified P-
VOL and the specified S-VOL.
The command ends abnormally because the
volume which is being deleted is specified.
The command ends abnormally because the
specified Thin Image pair does not exist.
The command ends abnormally because the
specified Thin Image pair is assigned to an S-VOL.
The operation cannot be performed because the
snapshot tree is being deleted.
The operation failed because multiple versions of
DKCMAIN microcode are included.
The specified LDEV is not defined.
The command ends abnormally because an
unmounted volume is specified as the P-VOL of a
Thin Image pair or a Copy-on-Write Snapshot pair.
The command ends abnormally because an
unmounted volume is specified as the S-VOL of a
Thin Image pair or a Copy-on-Write Snapshot pair.
The command ends abnormally because the
blocked volume is specified as the S-VOL of a Thin
Image pair or a Copy-on-Write Snapshot pair.
The command ends abnormally because the
volume in formatting is specified as the S-VOL of a
Thin Image pair or a Copy-on-Write Snapshot pair.
The command ends abnormally because the shared
memory (FC, TPF, or Extension1) is not added for
necessary capacity or maintenance work is being
performed.
The shared memory for Thin Image or Copy-on-
Write Snapshot is not installed.
The program product is not installed.