Note For Duplication Of Cci - Hitachi VSP F1500 User And Reference Manual

• CCI version: 01-31-03/08 or later
• Platform on which both CCI applications are installed: other than
OpenVMS
• Storage system:
¢
¢
¢
¢
¢
• DKCMAIN microcode version:
¢
¢
¢
¢
¢

Note for duplication of CCI

When a failure does not occur in CCI, the running CCI application handles the
processing to keep the data consistency in the consistency group, for
example CTQ-Marker, and the other CCI application stands by in case of a
failure. If the stand-by CCI application issues the pairsplit command, an
error (EX_INVVOL) might occur. If this error occurs, issue the pairsplit
command from the other CCI application.
Remote volume discovery
In the configuration separating "Storage admin server (CCI server)" and each
production server, it is difficult to verify/check the volumes on the production
servers and the volumes described to the horcm.conf on CCI server.
In this configuration, you cannot use the following CCI capabilities:
• Command device security
• pairdisplay -fd option that displays the device file on the production host
view
• raidscan -find verify
To solve this configuration problem, CCI supports a way to discover the
volume information on the remote server by exporting the volume
information with the inqraid command, and by importing its output with the
raidscan -find command.
6-58
Hitachi Virtual Storage Platform (VSP)
Hitachi Virtual Storage Platform G1000, G1500, and Hitachi Virtual
Storage Platform F1500 (VSP G1000, VSP G1500, VSP F1500)
Hitachi Virtual Storage Platform G200, G400, G600, G800 (VSP Gx00
models)
Hitachi Virtual Storage Platform F400, F600, F800 (VSP Fx00 models)
Hitachi Unified Storage VM (HUS VM)
VSP: 70-06-20-00/00 or later
VSP G1000: 80-03-00-00/03 or later
VSP G1500, VSP F1500: 80-05-00-xx/xx or later
VSP Gx00 models and VSP Fx00 models: 83-03-00-xx/xx or later
HUS VM: 73-03-48-x0/00 or later
Data replication operations with CCI
Command Control Interface User and Reference Guide