Hitachi VSP F1500 User And Reference Manual page 448

Executing/
Error message
CMDRJE Executing
CMDRJE Executing
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
CMDRJE Executing
Get Command Async
Status
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
Table 9-62 SSB codes returned by raidcom delete ldev
Executing/
Error message
CMDRJE Executing
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
9-124
raidcom add rcu
Error code
Async
SSB1 SSB2
2E30 840A
2E30 840E
2E31 3001
2E31 3002
2E31 3101
2ED6 00EE
2ED6 3005
2ED6 3300
2EF3 3002
B980 B901
B980 B902
raidcom delete ldev
Error code
Async
SSB1 SSB2
2E00 0000
2E00 000E
2E00 0016
2E10 0000
Troubleshooting
Command Control Interface User and Reference Guide
Description
The port attribute is not Initiator (MCU).
The command cannot be executed with the
specified port attribute.
The command cannot be executed because the
RCU identification code of a path is invalid.
The operation cannot be performed because the
remote storage system does not support the path
between CUs.
The command cannot be executed because the
serial number is not unified in the specified path.
The command cannot be accepted because the
DKC is busy. After a while, execute the same
command.
An internal error occurred.
Call Hitachi Data Systems customer support.
The value of SSID on the remote storage system is
invalid.
The specified parameter is invalid. Check the
Command Control Interface Command Reference.
The command was rejected because the specified
port is for NAS Platform (System LU).
The command was rejected because the specified
port is for NAS Platform (User LU).
Description
The LDEV number is out of settable range.
This command does not support the emulation
type of the specified LDEV.
The command cannot be executed by receiving
multiple operations for the same LDEV.
The specified LDEV is used for a pair of
ShadowImage/Thin Image/Copy-on-Write
Snapshot/Volume Migration or as a relationship of
Compatible FlashCopy® V2/Compatible Software
for IBM® FlashCopy® SE.