Virtual Volume (Dynamic Provisioning For Mainframe) Operations - Hitachi VSP F1500 User And Reference Manual

Virtual volume (Dynamic Provisioning for Mainframe)
operations
Creating virtual volumes (Dynamic Provisioning for Mainframe)
To create LDEVs of virtual volumes (Dynamic Provisioning for Mainframe) and
make the LDEVs available to the host, perform the following Provisioning
operations.
Step
1
2
3
4
5
6
7
Operation
overview
SSID settings Configures the SSID unless it is
(arbitrarily) configured. Set (register) the
SSID by specifying undefined
LDEV numbers in the area in
which SSIDs are not defined.
Creating LDEVs Creates LDEVs by specifying
parity groups. Specifies only
3390-V for the emulation type.
Formatting Formats created LDEVs.
LDEVs
Creating LDEV Creates LDEV nicknames. This
nicknames operation is optional.
(arbitrarily)
Configuring MP Configures MP blades of
blades of created LDEVs.
LDEVs
Displaying a Displays an information of
LDEV created LDEV, and confirms an
information execution result of the
command.
Creating the Creates the pool for the Hitachi
pool (for the Dynamic Provisioning for
Hitachi mainframe.
Dynamic
Provisioning for
mainframe)
Provisioning operations with CCI
Command Control Interface User and Reference Guide
Description Executed command
raidcom modify ldev
-ldev_id<ldev#>
-ssid<value>
raidcom add ldev
-parity_grp_id <gno-sgno>
-ldev_id <ldev#>
{-capacity <size> |
-offset_capacity <size> |
-cylinder <size>}
-emulation 3390-V
-location <lba>]
[-mp_blade_id <mp#>]
raidcom initialize ldev
-ldev_id <ldev#>
-operation <type>
raidcom modify ldev
-ldev_id <ldev#>
-ldev_name <ldev naming>
raidcom modify ldev
-ldev_id <ldev#>
-mp_blade_id <mp#>
raidcom get ldev -ldev_id
<ldev#> ... [-cnt <count>]
[-key <keyword>]
raidcom add dp_pool
{{-pool_id <pool ID#>
[-pool_name <pool
naming>] | -pool_name
<pool naming> [-pool_id
<pool ID#>]} | -pool_id
<pool ID#> -pool_name
<pool naming>} {-ldev_id
<ldev#> ...[-cnt <count>] |
-grp_opt <group option>
-device_grp_name <device
group name> [<device
name>]}[ -user_threshold
<threshold_1>
[<threshold_2>] ]
5-33