Hitachi VSP F1500 User And Reference Manual page 489

Table 9-119 SSB codes returned by raidcom modify spm_group
Executing/
Error message
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
Table 9-120 SSB codes returned by raidcom add spm_wwn
Executing/
Error message
CMDRJE Executing
CMDRJE Executing
raidcom modify spm_group
Error code
Async
SSB1 SSB2
B980 B901
B9D4 B9D0
B9D4 B9D3
B9D4 B9D4
B9D4 B9DA
B9D4 B9DC
raidcom add spm_wwn
Error code
Async
SSB1 SSB2
B9D4 B9D0
B9D4 B9D2
Troubleshooting
Command Control Interface User and Reference Guide
Description
The command was rejected because the specified
port is for NAS Platform (System LU).
The command cannot be executed due to one of
the following reasons:
• Server Priority Manager is being used by
Storage Navigator or Device Manager -
Storage Navigator. Delete all settings of
Server Priority Manager using Storage
Navigator or Device Manager - Storage
Navigator.
• Server Priority Manager information for the
port WWN already exists in the system. Delete
Server Priority Manager information from
Performance Monitor.
The specified WWN or upper limit is invalid.
Server Priority Manager program product is not
installed.
The operation cannot be performed because it is
locked in another session.
SPM cannot be operated without specifying the
host group because the specified WWN, SPM group
to which the SPM name belongs, or the specified
SPM group is associated with the host group.
Description
The command cannot be executed due to one of
the following reasons:
• Server Priority Manager is being used by
Storage Navigator or Device Manager -
Storage Navigator. Delete all settings of
Server Priority Manager using Storage
Navigator or Device Manager - Storage
Navigator.
• Server Priority Manager information for the
port WWN already exists in the system. Delete
Server Priority Manager information from
Performance Monitor.
The specified WWN does not exist.
9-165