Hitachi VSP F1500 User And Reference Manual page 495

raidcom modify ldev -capacity_saving/-capacity_saving_mode
Executing/
Error message
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
CMDRJE Executing
CMDRJE Executing/
Async
Get Command
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Get Command Async
Status
Error code
Async
SSB1 SSB2
2E10 0215
2E10 0219
2E10 6020
2E10 6022
2E10 6026
2E11 001B
2E11 0209
2E11 6008
2E11 9400
2E20 0000
2E21 8103
2E21 810A
2E21 9000
2E30 0086
2E30 0099
2E30 009B
2E30 0206
Troubleshooting
Command Control Interface User and Reference Guide
Description
The operation cannot be performed because the
specified volume is being used by Quick Restore of
ShadowImage.
The tiering policy is enabled for the specified
LDEV.
The deduplication function cannot be used in the
pool linked with the specified LDEV.
The operation cannot be performed because the
deduplication system data volume of the pool
linked with the specified LDEV is blocked.
The specified virtual volume cannot be operated
because the used capacity of the pool associated
with the specified virtual volume exceeds the
depletion threshold.
The specified LDEV is blocked.
The operation cannot be performed due to a cache
memory failure or maintenance work being
performed.
The operation cannot be performed because the
pool linked with the specified LDEV is in unusable
status.
The command cannot be accepted. Wait a while,
and issue the same command.
The specified LDEV is not installed.
The operation cannot be performed because the
capacity of shared memory is insufficient.
The shared memory is not installed.
The program product is not installed.
The operation cannot be performed because the
specified volume is not a DP-VOL.
The specified LDEV is set that the Data Direct
Mapping attribute is enabled.
The operation cannot be performed because the
page reservation is set for the specified LDEV.
The operation cannot be performed because the
specified LDEV is a deduplication system data
volume.
9-171