Using Cci With The Global Storage Virtualization Function - Hitachi VSP F1500 User And Reference Manual

Using CCI with the global storage virtualization function

To use CCI with the system configuration using the global storage
virtualization function, the following two methods can be used.
• Specifying a virtual storage machine to HORCM_VCMD in configuration
definition files
• Specifying a virtual storage machine to command options (that is, -s
<seq#> or -u <unit id>)
If you specify the virtual storage machine to HORCM_VCMD of the
configuration file, the shell scripts can be used continuously, because you do
not need to modify their scripts. However, if you define HORCM_VCMD, you
cannot operate the virtual storage machine whose the serial number is not
specified by HORC_VCMD. If you specify the virtual storage machine to the
command options (that is, -s <seq#> or -u <unit id>) instead of specifying
with HORCM_VCMD, you can also operate the virtual storage machine of the
serial number not specifying to HORCM_VCMD.
After you change the virtual storage machine configuration with the raidcom
add resource command or the raidcom delete resource command, restart
HORCM.
Configuration definition file settings with global storage
virtualization
This topic shows configuration definition file settings with the global storage
virtualization function. For details on other parameters, see
definition file on page 2-13. The global storage virtualization function is
CCI functions
Command Control Interface User and Reference Guide
Configuration
3-55