Hitachi VSP F1500 User And Reference Manual page 433

Executing/
Error message
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
raidcom replace snapshot
Error code
Async
SSB1 SSB2
2E20 0000
2E20 000B
2E20 000C
2E20 000D
2E21 8107
2E21 8108
2E21 9010
2E21 9306
2E21 930A
2E30 0077
2E30 0078
2E30 007C
2E30 007D
2E30 007F
2E30 0081
Troubleshooting
Command Control Interface User and Reference Guide
Description
The specified LDEV is not defined.
The command ends abnormally because an
unmounted volume is specified as the S-VOL of a
Thin Image pair or a Copy-on-Write Snapshot pair.
The command ends abnormally because the
blocked volume is specified as the S-VOL of a Thin
Image pair or a Copy-on-Write Snapshot pair.
The command ends abnormally because the
volume in formatting is specified as the S-VOL of a
Thin Image pair or a Copy-on-Write Snapshot pair.
The command ends abnormally because the shared
memory (FC, TPF, or Extension1) is not added for
necessary capacity or maintenance work is being
performed.
The shared memory for Thin Image or Copy-on-
Write Snapshot is not installed.
The program product is not installed.
The virutal LDEV ID for a virtual storage machine is
not defined on the specified LDEV.
The virtual storage machine with the specified
serial number is not found.
The command ends abnormally because the
volume is already used as the P-VOL of a Thin
Image pair or a Copy-on-Write Snapshot pair is
specified as the S-VOL.
The command ends abnormally because the
volume is already used as the S-VOL of a Thin
Image pair or a Copy-on-Write Snapshot pair is
specified as the S-VOL.
The command ends abnormally because the
volume other than OPEN-V is specified as the S-
VOL of a Thin Image pair or a Copy-on-Write
Snapshot pair.
The command ends abnormally because the
volume whose command device is set is specified
as the S-VOL of a Thin Image pair or a Copy-on-
Write Snapshot pair.
The command ends abnormally because the
volume having no path definition is specified as the
S-VOL of a Thin Image pair or the specified Thin
Image pair doest not exist.
The command ends abnormally because the
external volume mapped for the online data
9-109