Provisioning Operations That Can Be Performed On Device Groups - Hitachi VSP F1500 User And Reference Manual

Operation type
Provisioning operations that can be performed on device
groups
You can use CCI to perform provisioning operations on device groups. When
you specify a device group, you can perform operations on all LDEVs in the
device group at the same time. For details about device groups, see
grouping function on page
The following table lists the provisioning operations that can be executed by
specifying a device group.
Table 5-2 Performing provisioning operations by specifying a device group
Register a journal group to a journal
Delete a journal group from a journal/delete a journal
Delete an LDEV/V-VOL
Extend the capacity of V-VOL for Dynamic Provisioning,
Dynamic Provisioning for Mainframe, Dynamic Tiering,
active flash, Dynamic Tiering for Mainframe, or active flash
for mainframe
Display the LDEV information
Format an LDEV
Create an LU path
Delete an LU path
Create a pool for Copy-on-Write Snapshot
Extend the capacity of a pool for Copy-on-Write Snapshot
Create a pool for Dynamic Provisioning, Dynamic
Provisioning for Mainframe
Extend the capacity of a pool for Dynamic Provisioning,
Dynamic Provisioning for Mainframe, Dynamic Tiering,
active flash, Dynamic Tiering for Mainframe, or active flash
for mainframe
Create a resource group
Delete a resource group
Description
Display journal
information.
Contents of operation
Provisioning operations with CCI
Command Control Interface User and Reference Guide
Corresponding command
raidcom get journal [ -key <keyword>]raidcom get
journal[t]
3-35.
LDEV
Command
raidcom add journal
raidcom delete journal
raidcom delete ldev
raidcom extend ldev
raidcom get ldev
raidcom initialize ldev
raidcom add lun
raidcom delete lun
raidcom add snap_pool
raidcom add snap_pool
raidcom add dp_pool
raidcom add dp_pool
raidcom add resource
raidcom delete resource
5-13