Hitachi VSP F1500 User And Reference Manual page 413

Executing/
Error message
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
CMDRJE Executing
raidcom add snapshot
Error code
Async
SSB1 SSB2
2E10 8102
2E10 9701
2E10 9705
2E10 9706
2E10 9707
2E10 9708
2E10 970D
2E10 970E
2E10 970F
2E10 9712
2E10 9713
2E10 9800
Troubleshooting
Command Control Interface User and Reference Guide
Description
A pair cannot be created because there is not
enough free shared memory space.
The command ends abnormally because the pair is
in the state of unacceptable the command.
A Thin Image pair or a Copy-on-Write Snapshot
pair cannot be created because the number of Thin
Image pairs or Copy-on-Write Snapshot pairs has
already reached the maximum.
A Thin Image pair cannot be created because the
maximum number of Snapshot IDs (MU numbers)
has already been in use for the specified P-VOL.
A Thin Image pair cannot be created because the
maximum number of Snapshot groups has already
been defined, or the maximum number of Thin
Image pairs has already been defined in the
specified Snapshot group.
A Thin Image pair cannot be created because the
DP pool is being initialized.
The pair cannot be created because the number of
pair layers in the cascade configuration exceeds
the maximum number.
The pair cannot be created because the number of
clone attribute pair layers exceeds the maximum
number.
When the pair status is other than PAIR or PSUS,
you cannot create a pair by specifying the S-VOL of
a Thin Image pair.
Thin Image pairs that can be cascaded or cloned
and Thin Image pairs that cannot be cascaded or
cloned cannot be contained in a snapshot tree.
The operation cannot be performed because the
snapshot tree is being deleted.
An error occurred at the operation of Thin Image
due to one of the following reasons:
• The LDEV number specified for the P-VOL or
the S-VOL is incorrect.
• The LDEV specified as the P-VOL or the S-VOL
is not paired.
• The pair of the specified P-VOL or the S-VOL is
not ready to perform the specified operation.
• The specified Snapshot ID (MU number) is
wrong.
• The specified Snapshot ID (MU number) is
already used.
9-89